Antelos Sub-EP

• Sharp & vivid transfers
• Clog-free performance for 24 x 7 printing
• Extended print head life
• Excellent reliability , run ability and reproducibility
• Good all round color fastness

Ink Jet Printing

Recommended printing environment Temperature 20-22° C and relative humidity between 60- 65%

Fixation

Transfer printing from paper to polyester fabric
Fixation with hot press at 200-210° C for 25-30 secs*
Transfer Technique and Precaution
Does not require subsequent washing off process
Dry heat not recommended for fabric processing & garmenting

Disclaimer : This information and our technical advice-whether verbal, in writing or in the way of trials-is given in good faith but without warranty. The data represent results of internal tests Life-like digital printing performed with the specific ink, fabric and print resolution under ideal conditions. Hence the results in actual uses may vary, depending upon the particular conditions of use. Our advice does not release user from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and products manufactured by user on the basis of our technical advice are beyond our control and, therefore entirely at user’s own responsibility. The information in this brochure is subject to change without notice. Solunaris Private Limited reserve the right to modify its products at any time without further obligation.